SEED Labs – RSA Public-Key Encryption and Signature Lab 1 RSA Public-Key Encryption and Signature Lab Copyright 2018 Wenliang Du, Syracuse University….

SEED Labs – RSA Public-Key Encryption and Signature Lab 1

RSA Public-Key Encryption and Signature Lab

Copyright © 2018 Wenliang Du, Syracuse University.

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International

License. A human-readable summary of (and not a substitute for) the license is the following: You are free to

copy and redistribute the material in any medium or format. You must give appropriate credit. If you remix,

transform, or build upon the material, you must distribute your contributions under the same license as the

original. You may not use the material for commercial purposes.

1 Introduction

RSA (RivestShamirAdleman) is one of the first public-key cryptosystems and is widely used for secure

communication. The RSA algorithm first generates two large random prime numbers, and then use them

to generate public and private key pairs, which can be used to do encryption, decryption, digital signature

generation, and digital signature verification. The RSA algorithm is built upon number theories, and it can

be quite easily implemented with the support of libraries.

The learning objective of this lab is for students to gain hands-on experiences on the RSA algorithm.

From lectures, students should have learned the theoretic part of the RSA algorithm, so they know mathematically

how to generate public/private keys and how to perform encryption/decryption and signature

generation/verification. This lab enhances student’s understanding of RSA by requiring them to go through

every essential step of the RSA algorithm on actual numbers, so they can apply the theories learned from

the class. Essentially, students will be implementing the RSA algorithm using the C program language. The

lab covers the following security-related topics:

• Public-key cryptography

• The RSA algorithm and key generation

• Big number calculation

• Encryption and Decryption using RSA

• Digital signature

• X.509 certificate

Lab environment. This lab has been tested on our pre-built Ubuntu 12.04 VM and Ubuntu 16.04 VM,

both of which can be downloaded from the SEED website. This lab requires the openssl library, which

is already installed on the Ubuntu 16.04, but not on the Ubuntu 12.04 VM. If you use Ubuntu 12.04, please

run the following two commands to install openssl:

$ su do apt-get update

$ su do apt-get install libssl-dev

Acknowledgment This lab was developed with the help of Shatadiya Saha, a graduate student in the

Department of Electrical Engineering and Computer Science at Syracuse University.

2 Background

The RSA algorithm involves computations on large numbers. These computations cannot be directly conducted

using simple arithmetic operators in programs, because those operators can only operate on primitive

SEED Labs – RSA Public-Key Encryption and Signature Lab 2

data types, such as 32-bit integer and 64-bit long integer types. The numbers involved in the RSA algorithms

are typically more than 512 bits long. For example, to multiple two 32-bit integer numbers a and b, we just

need to use a*b in our program. However, if they are big numbers, we cannot do that any more; instead,

we need to use an algorithm (i.e., a function) to compute their products.

There are several libraries that can perform arithmetic operations on integers of arbitrary size. In this

lab, we will use the Big Number library provided by openssl. To use this library, we will define each big

number as a BIGNUM type, and then use the APIs provided by the library for various operations, such as

addition, multiplication, exponentiation, modular operations, etc.


All the big number APIs can be found from In the following,

we describe some of the APIs that are needed for this lab.

• Some of the library functions requires temporary variables. Since dynamic memory allocation to create

BIGNUMs is quite expensive when used in conjunction with repeated subroutine calls, a BN CTX

structure is created to holds BIGNUM temporary variables used by library functions. We need to

create such a structure, and pass it to the functions that requires it.

BN_CTX *ctx = BN_CTX_new()

• Initialize a BIGNUM variable

BIGNUM *a = BN_new()

• There are a number of ways to assign a value to a BIGNUM variable.

// Assign a value from a decimal number string

BN_dec2bn(&a, “12345678901112231223”);

// Assign a value from a hex number string

BN_hex2bn(&a, “2A3B4C55FF77889AED3F”);

// Generate a random number of 128 bits

BN_rand(a, 128, 0, 0);

// Generate a random prime number of 128 bits

BN_generate_prime_ex(a, 128, 1, NULL, NULL, NULL);

• Print out a big number.

void printBN(char *msg, BIGNUM * a)


// Convert the BIGNUM to number string

char * number_str = BN_bn2dec(a);

// Print out the number string

printf(“%s %sn”, msg, number_str);

// Free the dynamically allocated memory



SEED Labs – RSA Public-Key Encryption and Signature Lab 3

• Compute res = a jQuery20009559303881248626_1524865019533?? b and res = a + b:

BN_sub(res, a, b);

BN_add(res, a, b);

• Compute res = a b. It should be noted that a BN CTX structure is need in this API.

BN_mul(res, a, b, ctx)

• Compute res = a b mod n:

BN_mod_mul(res, a, b, n, ctx)

• Compute res = ac mod n:

BN_mod_exp(res, a, c, n, ctx)

• Compute modular inverse, i.e., given a, find b, such that a b mod n = 1. The value b is called

the inverse of a, with respect to modular n.

BN_mod_inverse(b, a, n, ctx);

2.2 A Complete Example

We show a complete example in the following. In this example, we initialize three BIGNUM variables, a,

b, and n; we then compute a b and (ab mod n).

/* bn_sample.c */

#include <stdio.h>

#include <openssl/bn.h>

#define NBITS 256

void printBN(char *msg, BIGNUM * a)


/* Use BN_bn2hex(a) for hex string

* Use BN_bn2dec(a) for decimal string */

char * number_str = BN_bn2hex(a);

printf(“%s %sn”, msg, number_str);



int main ()


BN_CTX *ctx = BN_CTX_new();

BIGNUM *a = BN_new();

BIGNUM *b = BN_new();

BIGNUM *n = BN_new();

BIGNUM *res = BN_new();

SEED Labs – RSA Public-Key Encryption and Signature Lab 4

// Initialize a, b, n

BN_generate_prime_ex(a, NBITS, 1, NULL, NULL, NULL);

BN_dec2bn(&b, “273489463796838501848592769467194369268”);

BN_rand(n, NBITS, 0, 0);

// res = a*b

BN_mul(res, a, b, ctx);

printBN(“a * b = “, res);

// res = aˆb mod n

BN_mod_exp(res, a, b, n, ctx);

printBN(“aˆc mod n = “, res);

return 0;


Compilation. We can use the following command to compile bn sample.c (the character after – is the

letter `, not the number 1; it tells the compiler to use the crypto library).

$ gcc bn_sample.c -lcrypto

3 Lab Tasks

To avoid mistakes, please avoid manually typing the numbers used the lab tasks. Instead, copy and paste the

numbers from this PDF file.

Submission requirement: In your report, you should describe your steps and include your code and

running results.

3.1 Task 1: Deriving the Private Key

Let p, q, and e be three prime numbers. Let n = p*q. We will use (e, n) as the public key. Please

calculate the private key d. The hexadecimal values of p, q, and e are listed in the following. It should be

noted that although p and q used in this task are quite large numbers, they are not large enough to be secure.

We intentionally make them small for the sake of simplicity. In practice, these numbers should be at least

512 bits long (the one used here are only 128 bits).

p = F7E75FDC469067FFDC4E847C51F452DF

q = E85CED54AF57E53E092113E62F436F4F

e = 0D88C3

3.2 Task 2: Encrypting a Message

Let (e, n) be the public key. Please encrypt the message “A top secret!” (the quotations are not

included). We need to convert this ASCII string to a hex string, and then convert the hex string to a BIGNUM

using the hex-to-bn API BN hex2bn(). The following python command can be used to convert a plain

ASCII string to a hex string.

SEED Labs – RSA Public-Key Encryption and Signature Lab 5

$ python -c ‘print(“A top secret!”.encode(“hex”))’


The public keys are listed in the followings (hexadecimal). We also provide the private key d to help

you verify your encryption result.

n = DCBFFE3E51F62E09CE7032E2677A78946A849DC4CDDE3A4D0CB81629242FB1A5

e = 010001 (this hex value equals to decimal 65537)

M = A top secret!

d = 74D806F9F3A62BAE331FFE3F0A68AFE35B3D2E4794148AACBC26AA381CD7D30D

3.3 Task 3: Decrypting a Message

The public/private keys used in this task are the same as the ones used in Task 2. Please decrypt the following

ciphertext C, and convert it back to a plain ASCII string.

C = 8C0F971DF2F3672B28811407E2DABBE1DA0FEBBBDFC7DCB67396567EA1E2493F

You can use the following python command to convert a hex string back to to a plain ASCII string.

$ python -c ‘print(“4120746f702073656372657421”.decode(“hex”))’

A top secret!

3.4 Task 4: Signing a Message

The public/private keys used in this task are the same as the ones used in Task 2. Please generate a signature

for the following message (please directly sign this message, instead of signing its hash value):

M = I owe you $2000.

Please make a slight change to the message M, such as changing $2000 to $3000, and sign the modified

message. Compare both signatures and describe what you observe.

3.5 Task 5: Verifying a Signature

Bob receives a message M = “Launch a missile.” from Alice, with her signature S. We know that

Alice’s public key is (e, n). Please verify whether the signature is indeed Alice’s or not. The public key

and signature (hexadecimal) are listed in the following:

M = Launch a missle.

S = 643D6F34902D9C7EC90CB0B2BCA36C47FA37165C0005CAB026C0542CBDB6802F

e = 010001 (this hex value equals to decimal 65537)

n = AE1CD4DC432798D933779FBD46C6E1247F0CF1233595113AA51B450F18116115

Suppose that the signature in is corrupted, such that the last byte of the signature changes from 2F to 3F,

i.e, there is only one bit of change. Please repeat this task, and describe what will happen to the verification


3.6 Task 6: Manually Verifying an X.509 Certificate

In this task, we will manually verify an X.509 certificate using our program. An X.509 contains data about

a public key and an issuer’s signature on the data. We will download a real X.509 certificate from a web

SEED Labs – RSA Public-Key Encryption and Signature Lab 6

server, get its issuer’s public key, and then use this public key to verify the signature on the certificate.

Step 1: Download a certificate from a real web server. We use the server in

this document. Students should choose a different web server that has a different certificate than the

one used in this document (it should be noted that share the same certificate with We can download certificates using browsers or use the following command:

$ openssl s_client -connect -showcerts

Certificate chain

0 s:/C=US/ST=California/L=Los Angeles/O=Internet Corporation for Assigned

Names and Numbers/OU=Technology/

i:/C=US/O=DigiCert Inc/ SHA2 High Assurance

Server CA







1 s:/C=US/O=DigiCert Inc/ SHA2 High

Assurance Server CA

i:/C=US/O=DigiCert Inc/ High Assurance

EV Root CA







The result of the command contains two certificates. The subject field (the entry starting with s:) of

the certificate is, i.e., this is’s certificate. The issuer field (the

entry starting with i:) provides the issuer’s information. The subject field of the second certificate is the

same as the issuer field of the first certificate. Basically, the second certificate belongs to an intermediate

CA. In this task, we will use CA’s certificate to verify a server certificate.

If you only get one certificate back using the above command, that means the certificate you get is signed

by a root CA. Root CAs’ certificates can be obtained from the Firefox browser installed in our pre-built VM.

Go to the Edit Õ Preferences Õ Privacy and then Security Õ View Certificates. Search

for the name of the issuer and download its certificate.

Copy and paste each of the certificate (the text between the line containing “Begin CERTIFICATE”

and the line containing “END CERTIFICATE”, including these two lines) to a file. Let us call the first one

c0.pem and the second one c1.pem.

Step 2: Extract the public key (e, n) from the issuer’s certificate. Openssl provides commands to

extract certain attributes from the x509 certificates. We can extract the value of n using -modulus. There

is no specific command to extract e, but we can print out all the fields and can easily find the value of e.

For modulus (n):

$ openssl x509 -in c1.pem -noout -modulus

SEED Labs – RSA Public-Key Encryption and Signature Lab 7

Print out all the fields, find the exponent (e):

$ openssl x509 -in c1.pem -text -noout

Step 3: Extract the signature from the server’s certificate. There is no specific openssl command to

extract the signature field. However, we can print out all the fields and then copy and paste the signature

block into a file (note: if the signature algorithm used in the certificate is not based on RSA, you can find

another certificate).

$ openssl x509 -in c0.pem -text -noout

Signature Algorithm: sha256WithRSAEncryption






We need to remove the spaces and colons from the data, so we can get a hex-string that we can feed into

our program. The following command commands can achieve this goal. The tr command is a Linux utility

tool for string operations. In this case, the -d option is used to delete “:” and “space” from the data.

$ cat signature | tr -d ‘[:space:]:’




Step 4: Extract the body of the server’s certificate. A Certificate Authority (CA) generates the signature

for a server certificate by first computing the hash of the certificate, and then sign the hash. To verify the

signature, we also need to generate the hash from a certificate. Since the hash is generated before the

signature is computed, we need to exclude the signature block of a certificate when computing the hash.

Finding out what part of the certificate is used to generate the hash is quite challenging without a good

understanding of the format of the certificate.

X.509 certificates are encoded using the ASN.1 (Abstract Syntax Notation.One) standard, so if we can

parse the ASN.1 structure, we can easily extract any field from a certificate. Openssl has a command called

asn1parse, which can be used to parse a X.509 certificate.

$ openssl asn1parse -i -in c0.pem

0:d=0 hl=4 l=1522 cons: SEQUENCE

4:d=1 hl=4 l=1242 cons: SEQUENCE Ê

8:d=2 hl=2 l= 3 cons: cont [ 0 ]

10:d=3 hl=2 l= 1 prim: INTEGER :02

13:d=2 hl=2 l= 16 prim: INTEGER


… …

1236:d=4 hl=2 l= 12 cons: SEQUENCE

1238:d=5 hl=2 l= 3 prim: OBJECT :X509v3 Basic Constraints

1243:d=5 hl=2 l= 1 prim: BOOLEAN :255

1246:d=5 hl=2 l= 2 prim: OCTET STRING [HEX DUMP]:3000

1250:d=1 hl=2 l= 13 cons: SEQUENCE Ë

1252:d=2 hl=2 l= 9 prim: OBJECT :sha256WithRSAEncryption

SEED Labs – RSA Public-Key Encryption and Signature Lab 8

1263:d=2 hl=2 l= 0 prim: NULL

1265:d=1 hl=4 l= 257 prim: BIT STRING

The field starting from Ê is the body of the certificate that is used to generate the hash; the field starting

from Ë is the signature block. Their offsets are the numbers at the beginning of the lines. In our case, the

certificate body is from offset 4 to 1249, while the signature block is from 1250 to the end of the file. For

X.509 certificates, the starting offset is always the same (i.e., 4), but the end depends on the content length

of a certificate. We can use the -strparse option to get the field from the offset 4, which will give us the

body of the certificate, excluding the signature block.

$ openssl asn1parse -i -in c0.pem -strparse 4 -out c0_body.bin -noout

Once we get the body of the certificate, we can calculate its hash using the following command:

$ sha256sum c0_body.bin

Step 5: Verify the signature. Now we have all the information, including the CA’s public key, the CA’s

signature, and the body of the server’s certificate. We can run our own program to verify whether the

signature is valid or not. Openssl does provide a command to verify the certificate for us, but students are

required to use their own programs to do so, otherwise, they get zero credit for this task.

4 Submission

You need to submit a detailed lab report to describe what you have done and what you have observed,

including screenshots and code snippets. You also need to provide explanation to the observations that are

interesting or surprising. You are encouraged to pursue further investigation, beyond what is required by the

lab description. Your can earn bonus points for extra efforts (at the discretion of your instructor).

"Our Prices Start at $11.99. As Our First Client, Use Coupon Code GET15 to claim 15% Discount This Month!!":

Get started